Custom corrected intakes for the Trumpeter 1/32 A‑6 Intruder that fix shape and detail issues and give this defining feature of the aircraft the attention it deserves. These 3D printed intakes include the engine fan at the base and are designed to draw the eye to the front of your Intruder build.
 
These 1/32 A‑6 Intruder intakes are designed specifically for the Trumpeter 1/32 kit and provide a more accurate, seamless look than the kit intakes. Custom‑drawn and printed to improve the intake shape, depth, and internal detail, they correct one of the most visible areas on the model.
Trumpeter’s molded intake parts leave visible seams and simplified internal contours that stand out on a finished A‑6 build. These Black Ops 3D replacements clean up those issues and help your Intruder match reference photos more closely.
Key features
Corrected intakes for the Trumpeter 1/32 A‑6 Intruder kit (A‑6A and A‑6E variants).
More accurate intake shape and depth to better represent the real aircraft.
Seamless trunking to eliminate the prominent intake seams found in the kit parts.
Included engineering/engine fan at the base of the intake for added detail.
High‑resolution 3D printed parts for crisp detail and easy cleanup.
Designed to enhance one of the most defining visual features of the A‑6.
Compatibility
Intended for the Trumpeter 1/32 A‑6 Intruder family of kits (such as 1/32 A‑6A / A‑6E).
Suitable for USN and USMC A‑6 schemes, including Vietnam‑era and later Intruders.
 
Installation and use
Carefully remove the kit intake parts and dry‑fit the replacement intakes to the fuselage before gluing. Clean up any support remnants, then use CA glue or epoxy to attach the new intakes, working in small sections to keep joints aligned. Once fully cured, blend any minor gaps with putty, prime, and paint as you would the rest of the airframe.